MX2000 Glovebox Welding System

AMADA WELD TECH MX2000 gloveboxes can be configured using any combination of ovens and antechambers, gas analyzers, moisture monitors, environmental controls, additional environmental chambers, and more – to meet your unique process requirements.

Built in the USA and perfect for applications including optoelectronic package welding, electronic packaging, semiconductor packaging, transistor outline package welding, ic package welding, and more.

  • Wide choice of control capabilities
  • Range of vacuum pumps
  • Sturdy, rugged, modular design
  • Optional programmable logic controlled vacuum bake ovens
  • Optional single or dual-column gas purification units

Technical Specifications

Leak Rate (at 2,5 mbar)< 1.0 SCFH (0.3m3/h)
Enclosure Size (W x D Floor / D top x H)48 in x 39 in / 29 in x 36 in (1219 mm x 965 mm / 736 mm x 914 mm) - 2 Glove Ports
56 in x 39 in / 29 in x 36 in (1423 mm x 965 mm / 736 mm / 914 mm) - 4 Glove Ports
Antechamber and Oven Sizes (L x W x H)14 in x 7.63 in x 7.63 in (355 mm x 195 mm x 195 mm) - Stainless Steel
18.5 in x 11.5 in x 10.5 in (465 mm x 290 mm x 265 mm) - Stainless Steel
27 in x 11.5 in x 10.5 in (686 mm x 290 mm x 265 mm) - Stainless Steel
Antechamber ControlsManual or PCL: Backfill
Oven ControlsManual or PLC: Temperature, Vacuum, Backfill
Antechamber & Oven InterlocksNone on 14 in model; optional on 18.5 in and 27 in models
Antechamber & Automated Sliding Inner DoorNo
Antechamber and Oven Door Loading OptionsFront, Rear, End
Oven Heating ConfigurationHeated Walls
Heated Shelves
Bakeout Oven Temperature125°C standard / 200°C high temp optional
18.5 in and 27 in Wall Heated type 200°C
18.5 in and 27 in Heated Shelf type 200°C or 300°C
Historical Data CollectionNo
Input Power208-240 VAC, 30 A
Single or 3 PhaseSingle
Input Gas60psi minimum (4 bars) / 200scfh (5.7m3/h)
Cooling Water20 - 27° C, 0.5 L/min minimum flow or optional integrated water recirculator. 20 - 27° C, 0.5 L/min minimum flow or optional integrated water recirculator. The installation area should be free of sudden temperature fluctuations and humidity should be max 85% (non-condensing)
WeightVaries with selected options