Find suggested replacement products here
Learn when you might choose one technology over the other in this blog piece: Nd:YAG for Fiber Laser Welding?
Use a picosecond laser for corrosion resistant black marking on stainless steel alloys: UDI marking, banding, part traceability
What’s all the fuss about? Read about micromachining with a femtosecond laser in our blog.
What is it and what can you do with it?
Laser soldering and plastic welding; both possible with direct diode lasers
Read our blog piece Bringing Laser Technology In House: 6 Simple Steps to Success which outlines some of the pitfalls and how to avoid when moving from contract manufacturing.
How to design ring projections for hermetic sealing.
Configure your Glovebox here
Fundamentals of Hot Bar Reflow Soldering
Check out these tips and tricks for successful setup of your micro tig welding application.
Laser or resistance technology? Which do you choose when it’s critical to prevent external environmental conditions from penetrating the package?
Projection welding of Fasteners to Hot Stamped Boron Components
Laser Cleaning Metal Improves Battery Pack Reliability. Read the blog now.
Industry increasingly relies on sensors in both factories and products. New sensor technologies mean new product capabilities with improved performance and efficiency.
Fast, clean, efficient! Read the blog.
Dark marks that are resistant to bacterial growth, passivation, corrosion and autoclaving. Read more.
High production rate + high yield = industrial process success. Understanding both the process requirements and production environment allows companies to optimize their production rates resulting in lower cost per part and higher profit.
Visit our blog for more information
AMADA WELD TECH has proudly designed and manufactured its products for the global market for more than 60 years and also sells, distributes, services and supports the sales of the other, Miyachi group branded products: Miyachi, Miyachi Peco and Miyachi Eapro. You will find that the product section of our website has been designed to reflect the different product lines so that you may see the large number of brands and products that we offer, ensuring you get exactly the solution you need for your specific application!
Miyachi Unitek products are manufactured by AMADA WELD TECH in Monrovia, CA and include the UB29 and DC29 linear dc inverter welders, the industry-leading HF27 high frequency inverter welder, the ADP series capacitive discharge welder family, the ADAM advanced weld control, the complete line of Thinline weld heads, and more. AMADA WELD TECH (MAC), now a wholly owned subsidiary of Miyachi Corporation (MHC), was founded as the Weldmatic Division of Unitek Corporation in 1948.
Miyachi Corporation was established as Miyachi Electronics Co., Ltd. in Tokyo, Japan in 1972, merged with Miyachi Laser System Co Ltd. in 1990 and acquired Unitek Equipment Corporation in 1994, merging it with AMADA WELD TECH to form Unitek Miyachi Corporation, renamed AMADA WELD TECH Corporation in 2005. Miyachi is well known for the development and sale of the world’s first digital weld monitor checker in 1973. Miyachi products are manufactured in Japan and include the MM-315A portable weld checker, the IPB5000A inverter weld control and the popular A Series Nd:YAG laser welders.
One of the global brands offered by AMADA WELD TECH, Miyachi Peco products are manufactured in Puchheim, Germany and include the AWS3 active welding system, MG3 weld monitor, ISQ inverter weld control and MFP resistance spot welding heads. Peco was founded in 1908 in Passing, Germany, was acquired by AMADA WELD TECH (then Unitek Miyachi Corporation) from Messer Griesheim in 2000, and merged with Miyachi Technos Europe GmbH in 2005 to form Miyachi Europe Corporation.
Miyachi Eapro is one of the global brands offered by AMADA WELD TECH. Founded in The Netherlands as Weld Equip BV, the company was acquired by AMADA WELD TECH (then Unitek Miyachi) in 1995 and renamed Unitek Eapro. This organization merged with Miyachi Europe Corporation in 2008 to form the company that exists today. Miyachi EAPRO products are manufactured in Helmond, The Netherlands, and include the newHorizon reflow soldering and bonding systems and the Emerald series LCD repair stations.
Learn more about AMADA WELD TECH and our industry-leading products in our newsroom.
An educated customer is a happy customer! Learn more about our eight different manufacturing technologies, watch a video, schedule some training or sign up for our blog in the Learning Center.
Everyone needs a little help now and again. Visit the support center for technical documents, applications assistance, field service, customer service, sales assistance, software downloads and more.